PRINT

Print the image on the glossy side of the decal paper ; Reverse the image ; Print setting ;glossy heavy weight paper(120-185g) ; maximum photo resolution

SOAK IN WATER

Place the cut out image in a bowl of water；for around 3-5second s.Take out the wet ecal and leave it for 30-60 seconds.(use warm water in winter as cold water could  compromise adhesion )

RE MOVE THE BACK PAPER

*Apply glue on the surface of interst.

*Mount the wet decal face down and press firmly to ensure adherence.

*Gently peel off the backing paper

*Once the decal is in the right spot, spread evenly and remove the wrinkles.

*Squeegee out the excess moisture

CURING

HairDryer -Heat for 2-3mins,start at low heat then switch to hight heat. -if any air bubbles form, press tp release. Oven -Heat for10-20 mins 120℃.Once completely dr y,peel off the final film with fingertips or a craft knife be careful.not to make scratches as the ink is still weak.(Heat: heating in the oven at 200-250 for 10-20min will streng then the decal)