Tips on CISS (Continuous Ink Supply System) install - GlobalSublimation Technology CO.,Limited.

♦  Open the ink hole of the ink cartridge as the photo shows.
♦  Inject the ink into the empty ink holder (the bigger ones)
♦  Use the injector to pump the ink, (pressure difference, so make the ink (in the bigger box) fill in the ink cartridges.
♦  All is done and then fit the ink cartridge which is already full of ink into the printer.
♦  Then well done. Once for all, later, you don't need do the process any more, it can work automatically.

Notice: When the printer with CISS is working, please open the ventilation holes. After working, make sure that the holes are closed to prevent any dirty.

Trouble shooting on clogged print head:
1: Please clean printer head via computer with printing choice.—"Check the print head"

2: Check the status of the ink supply system. Please make sure that the ventilation holes of the bigger ink holder are open, not closed. It may cause the ink don't supply smoothly and then blog the ink out if the ventilation hole closed. If it has been the reason for clogging
print head,what you need do are:
• Use injector to absorb the ink from the ink cartridges and then put the ink into the ink holder. Then do the step 3 of CISS installment.

3: Clean the print head by using Epson special detergent (solvent).
Please note, although no decoder or red light on buttons are shown, they are still useable